Planet Polymer Technologies, Inc.
Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549

FORM 10-QSB

(MARK ONE)

[X]   QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF
THE SECURITIES AND EXCHANGE ACT OF 1934

For Quarterly Period Ended September 30, 2002

[   ]    TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF
THE SECURITIES AND EXCHANGE ACT OF 1934

Commission File Number: 0-26804

PLANET POLYMER TECHNOLOGIES, INC.


(Exact name of small business issuer as specified in its character)
     
CALIFORNIA   33-0502606

(State or other jurisdiction of incorporation or organization)   (I.R.S. Employer Identification No.)
     
9985 Businesspark Avenue, San Diego, California   92131

(Address of principal executive offices)   (Zip Code)

(858) 549-5130


(Issuer’s telephone number, including area code)

Check whether the issuer (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

     [X] YES    [   ] NO

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date:

         
Class   Outstanding at September 30, 2002

 
Common Stock, no par value
    9,207,884  

 


TABLE OF CONTENTS

CONDENSED BALANCE SHEET (UNAUDITED)
CONDENSED STATEMENTS OF OPERATIONS (UNAUDITED)
CONDENSED STATEMENT OF SHAREHOLDERS’ EQUITY (UNAUDITED)
CONDENSED STATEMENTS OF CASH FLOWS (UNAUDITED)
NOTES TO UNAUDITED FINANCIAL STATEMENTS
PART I — FINANCIAL INFORMATION
Item 2 — Management’s Discussion and Analysis of Financial Condition and Results of Operations
Item 3 — Controls and Procedures
PART II — OTHER INFORMATION
Item 1 — Legal Proceedings
Item 2 — Changes in Securities:
Item 3 — Defaults upon Senior Securities:
Item 4 — Submission of Matters to a Vote of Security Holders:
Item 5 — Other Information:
Item 6 — Exhibits and Reports on Form 8-K:
SIGNATURES
SECTION 302 CERTIFICATION
EXHIBIT 10.36
EXHIBIT 99.1


Table of Contents

PLANET POLYMER TECHNOLOGIES, INC.
FORM 10-QSB QUARTERLY REPORT
QUARTER ENDED SEPTEMBER 30, 2002

INDEX

                         
                    Page No.
                   
PART I - Financial Information
       
 
Item 1   Condensed Balance Sheet (Unaudited)
September 30, 2002
    2  
 
          Condensed Statements of Operations (Unaudited)
Three and Nine Months Ended September 30, 2002 and 2001
    3  
 
          Condensed Statement of Shareholders' Equity (Unaudited)
Nine Months Ended September 30, 2002
    4  
 
          Condensed Statements of Cash Flows (Unaudited)
Nine Months Ended September 30, 2002 and 2001
    5  
 
          Notes to Unaudited Financial Statements     6  
 
Item 2   Management's Discussion and Analysis of Financial Condition and Results of Operations     9  
 
Item 3   Controls and Procedures     13  
PART II - Other Information
 
Item 1   Legal Proceedings     14  
 
Item 2   Changes in Securities     14  
 
Item 3   Defaults upon Senior Securities     14  
 
Item 4   Submission of Matters to a Vote of Security Holders     14  
 
Item 5   Other Information     14  
 
Item 6   Exhibits and Reports on Form 8K     14  
SIGNATURES
      15  
CERTIFICATION
      16  

 


Table of Contents

PLANET POLYMER TECHNOLOGIES, INC.

CONDENSED BALANCE SHEET (UNAUDITED)


             
        September 30,
        2002
       
ASSETS
       
Current assets:
       
 
Cash
  $ 51,253  
 
Accounts receivable
    41,274  
 
Note receivable
    70,039  
 
Prepaid expenses and other current assets
    8,128  
 
   
 
   
Total current assets
    170,694  
Property and equipment, net of accumulated depreciation of $74,349
    10,543  
Patents and trademarks, net of accumulated amortization of $59,548
    171,788  
Other assets
    6,604  
 
   
 
   
Total assets
  $ 359,629  
 
   
 
LIABILITIES AND SHAREHOLDERS’ EQUITY
       
Current liabilities:
       
 
Accounts payable
  $ 7,285  
 
Accrued payroll and vacation
    16,204  
 
Accrued expenses
    20,658  
 
Capital lease obligations
    551  
 
   
 
   
Total liabilities
    44,698  
 
   
 
Shareholders’ equity:
       
 
Preferred Stock, no par value 4,250,000 shares authorized No shares issued or outstanding
     
 
Series A Convertible Preferred Stock, no par value 750,000 shares authorized No shares issued or outstanding
     
 
Common Stock, no par value 20,000,000 shares authorized 9,207,884 shares issued and outstanding
    14,582,123  
 
Accumulated deficit
    (14,267,192 )
 
   
 
   
Total shareholders’ equity
    314,931  
 
   
 
   
Total liabilities and shareholders’ equity
  $ 359,629  
 
   
 

The accompanying notes are an integral part of the financial statements.

2


Table of Contents

PLANET POLYMER TECHNOLOGIES, INC.

CONDENSED STATEMENTS OF OPERATIONS (UNAUDITED)


                                     
        THREE MONTHS ENDED SEPTEMBER 30,   NINE MONTHS ENDED SEPTEMBER 30,
       
 
        2002   2001   2002   2001
       
 
 
 
Revenues
  $ 63,879     $ 152,955     $ 141,648     $ 312,892  
 
   
     
     
     
 
Operating expenses:
                               
 
Cost of revenues
    46,798       108,234       102,258       249,026  
 
General and administrative
    147,993       188,656       335,002       622,906  
 
Marketing
    33,461       50,702       83,014       189,123  
 
Research and development
    22,687       54,641       107,642       283,392  
 
Loss from impairment of assets
                62,159        
 
   
     
     
     
 
   
Total operating expenses
    250,939       402,233       690,075       1,344,447  
 
   
     
     
     
 
   
Loss from operations
    (187,060 )     (249,278 )     (548,427 )     (1,031,555 )
Other income (expense), net
    4,894       (3,202 )     25,509       16,230  
 
   
     
     
     
 
   
Net loss
    (182,166 )     (252,480 )     (522,918 )     (1,015,325 )
   
Preferred Stock dividends
                      (10,450 )
 
   
     
     
     
 
   
Net loss applicable to common shareholders
  $ (182,166 )   $ (252,480 )   $ (522,918 )   $ (1,025,775 )
 
   
     
     
     
 
   
Net loss per share applicable to common shareholders (basic and diluted)
  $ (0.02 )   $ (0.03 )   $ (0.06 )   $ (0.11 )
 
   
     
     
     
 
   
Shares used in per share computations
    9,207,884       9,237,618       9,182,312       9,021,367  
 
   
     
     
     
 

The accompanying notes are an integral part of the financial statements.

3


Table of Contents

PLANET POLYMER TECHNOLOGIES, INC.

CONDENSED STATEMENT OF SHAREHOLDERS’ EQUITY (UNAUDITED)


                                 
    Common Stock                
   
  Accumulated        
    Shares   Amount   Deficit   Total
   
 
 
 
Balance at January 1, 2002
    9,165,618     $ 14,575,783     $ (13,744,274 )   $ 831,509  
Issuance of Common Stock for services
    42,266       6,340             6,340  
Net loss
                (522,918 )     (522,918 )
 
   
     
     
     
 
Balance at September 30, 2002
    9,207,884     $ 14,582,123     $ (14,267,192 )   $ 314,931  
 
   
     
     
     
 

The accompanying notes are an integral part of the financial statements.

4


Table of Contents

PLANET POLYMER TECHNOLOGIES, INC.

CONDENSED STATEMENTS OF CASH FLOWS (UNAUDITED)


                       
          Nine months ended September 30,
         
          2002   2001
         
 
Cash flows from operating activities:
               
 
Net loss
  $ (522,918 )   $ (1,015,325 )
 
Adjustments to reconcile net loss to net cash used by operating activities:
               
   
Depreciation and amortization
    22,209       64,811  
   
Bad debts
    80,000        
   
Loss from impairment of intangible assets
    62,159        
   
Gain on disposal of property and equipment
    (13,500 )     (25 )
   
Issuance of Common Stock for services
    6,340       6,300  
 
Changes in operating assets and liabilities:
               
   
Accounts receivable
    78,162       22,177  
   
Inventories
          14,419  
   
Prepaid expenses and other assets
    49,702       2,037  
   
Accounts payable
    (33,632 )     83,232  
   
Accrued expenses
    (55,404 )     (70,931 )
 
   
     
 
     
Net cash used by operating activities
    (326,882 )     (893,305 )
 
   
     
 
Cash flows from investing activities:
               
 
Purchases of property and equipment
          (19,947 )
 
Proceeds from sale of property and equipment
    13,500       25  
 
Cost of patents and other assets
          (5,112 )
 
Payments from note receivable
    112,831       93,783  
 
   
     
 
     
Net cash provided by investing activities
    126,331       68,749  
 
   
     
 
Cash flows from financing activities:
               
 
Proceeds from issuance of Common Stock and exercise of warrants and stock options
          40,801  
 
Principal payments on capital lease obligations
    (39,675 )     (8,950 )
 
   
     
 
     
Net cash provided (used) by financing activities
    (39,675 )     31,851  
 
   
     
 
     
Net decrease in cash
    (240,226 )     (792,705 )
Cash at beginning of period
    291,479       1,088,567  
 
   
     
 
Cash at end of period
  $ 51,253     $ 295,862  
 
   
     
 
Supplemental disclosure of non-cash activity:
               
 
Issuance of Common Stock dividends on Preferred Stock
  $     $ 10,450  
 
Issuance of Common Stock for services
    6,340       6,300  
 
Conversion of Series A Preferred Stock into Common Stock
          517,251  
 
Insurance purchased under a short-term financing agreement
          44,134  

The accompanying notes are an integral part of the financial statements.

5


Table of Contents

Planet Polymer Technologies, Inc.

NOTES TO UNAUDITED FINANCIAL STATEMENTS

1. Basis of Presentation

     The accompanying unaudited financial statements of Planet Polymer Technologies, Inc. (“Planet” or the “Company”) have been prepared in accordance with the interim reporting requirements of Form 10-QSB, pursuant to the rules and regulations of the Securities and Exchange Commission. However, they do not include all of the information and footnotes required by accounting principles generally accepted in the United States for complete financial statements.

     In management’s opinion, all adjustments (consisting of only normal recurring adjustments) considered necessary for a fair presentation have been included. Operating results for the nine months ended September 30, 2002 are not necessarily indicative of results that may be expected for the year ending December 31, 2002. For additional information, refer to the Company’s consolidated financial statements and notes thereto for the year ended December 31, 2001 contained in the Company’s Annual Report on Form 10-KSB for the fiscal year ended December 31, 2001.

     Certain reclassifications have been made to the interim financial statements of the prior year to conform to the presentation of the current interim periods. These reclassifications had no effect on previously reported results of operations or retained earnings.

2. Liquidity and Capital Resources

     The accompanying financial statements have been prepared on a going concern basis, which contemplates the realization of assets and satisfaction of liabilities in the ordinary course of business, and not on a liquidation basis. The Company has incurred losses since inception. For the nine months ended September 30, 2002 and 2001, the Company had net losses of approximately $523,000 and $1,015,000, respectively. As of September 30, 2002, the Company had an accumulated deficit of approximately $14,267,000. In August 2002, the purchaser of certain assets defaulted on certain payments and in October 2002 a major licencee filed for reorganization under the bankruptcy code (see note 6). These matters raise substantial doubt about the ability of the Company to continue as a going concern. The Company has reduced staff and operating expenses, reduced or sold non-Agway or agricultural assets, while continuing to provide technical research and development for Agway’s FreshSeal commercial program and Optigen development activities, as well as support of MIM asset utilization at Ryer Industries. However, management cannot provide any assurance that the Company will be successful in satisfying future working capital and other cash requirements past December 31, 2002. As a result, the Company may have to cease its operations and liquidate its assets and liabilities and prepare its financial statements on a liquidation basis. The accompanying financial statements do not include any adjustments that might result for this uncertainty. The Company’s future capital requirements will be dependent upon many factors, including, but not limited to, costs associated with the continued research and development of the Company’s proprietary polymer materials, costs associated with the filing and enforcement of the Company’s patents, costs associated with manufacturing scale-up and market acceptance, and the timing thereof, of the Company’s products.

3. Long-Lived Assets

     The Company assesses potential impairments to its long-lived assets when there is evidence that events or changes in circumstances have made recovery of the asset’s carrying value unlikely. An impairment loss would be recognized when the sum of the expected future net cash flows is less than the carrying amount of the asset. For similar assets held for sale, an impairment loss is recognized when the carrying amount exceeds its net realizable value or fair value less cost to sell. In June 2002, the Company recorded approximately $62,000 relating to the write-off of certain intangible assets when it was determined that net realizable value or fair value

6


Table of Contents

Planet Polymer Technologies, Inc.
NOTES TO UNAUDITED FINANCIAL STATEMENTS — (Continued)

less cost to sell these assets were insufficient to recover their carrying value. The impaired assets principally represent the Company’s EnviroPlastic® Z technology.

4. Earnings (Loss) Per Share

     Earnings (loss) per share is computed using the weighted average number of shares of common stock outstanding and is presented for basic and diluted earnings (loss) per share. Basic earnings (loss) per share is computed by dividing income (loss) available to common shareholders by the weighted average number of common shares outstanding for the period. Diluted earnings per share is computed by dividing income available to common shareholders by the weighted average number of common shares outstanding during the period increased to include, if dilutive, the number of additional common shares that would have been outstanding if the potential common shares had been issued. Dilutive potential common shares consist of the incremental common shares issuable upon conversion of convertible preferred stock (using the “if converted” method) and exercise of stock options and warrants (using the treasury stock method) for all periods.

     The Company has excluded all convertible preferred stock and outstanding stock options and warrants from the calculation of diluted loss per share for the three and nine months ended September 30, 2001 and 2002 because all such securities are anti-dilutive for those periods. Accordingly, diluted loss per share equals basic loss per share. The total number of potential common shares excluded from the calculation of diluted loss per share for the three and nine months ended September 30, 2002 was 1,208,650 and 1,208,650, respectively.

5. Income Taxes

     As the ultimate realization of the potential benefits of the Company’s net operating loss carryforwards is considered unlikely by management, the Company has offset the deferred tax assets attributable to those potential benefits through valuation allowances and, accordingly, the Company did not recognize any credits for income taxes in the accompanying condensed statements of operations to offset its pre-tax losses.

6. Subsequent Events

     On December 28, 2001, the Company sold certain assets of the Company relating to its Metal Injection Molding (“MIM”) business, including intellectual property, technology, manufacturing equipment and raw material and finished goods to Ryer Industries LLC (“Ryer”). In consideration of these assets, Ryer had agreed to pay to the Company cash in the amount of $328,157, plus a royalty of 6% on sales of custom feedstocks sold during the period January 1, 2002 and December 31, 2009. Additionally, Ryer had agreed to pay the Company a royalty on all tungsten carbide feedstock sales in the amount of $2.50 per net pound during the period July 1, 2002 and June 30, 2010. Ryer and the Company also entered into a Consulting Agreement for consulting services related to the business and technology sold to Ryer.

     Through October 31, 2002, the Company had received $178,157. In August 2002, Ryer defaulted on its required payments. The Company has continued to accrue interest on the notes; during the three months ended September 30, 2002, $3,803 of interest income was accrued but not collected. At September 30, 2002, the present value of the remaining amounts due was $143,539, discounted at 10%. Management has determined it reasonable to make a provision for loss of $73,500 against these notes. This loss provision is included in general and administrative expenses in the Condensed Statements of Operations. In October 2002, the Company and Ryer entered into a Forbearance Agreement which modified the payment schedule for the remaining obligations to the Company with payments to begin in December 2002, and continue through April 2003. Royalty payments associated with sales from these technologies were deferred and are scheduled to resume in December 2002. The Company remains in dispute with Ryer over how certain royalties are calculated and paid, but has agreed to stay

7


Table of Contents

Planet Polymer Technologies, Inc.
NOTES TO UNAUDITED FINANCIAL STATEMENTS — (Continued)

resolution of that dispute until other deferred payments are made or Ryer defaults. If Ryer defaults, the Company will seek to enforce the Confession Judgment given by Ryer to the Company in connection with the Forbearance Agreement, which provides among other things, for turnover to the Company of the assets sold by the Company to Ryer.

     In November 1998, the Company granted Agway an exclusive worldwide license in connection with the Company’s technology for time-release coatings for a variety of agricultural and food products (the “License Agreement”). The License Agreement outlines the general terms and conditions for the rights granted Agway thereunder. The Company and Agway agreed to execute further sub-agreements specifying the royalties to be paid to the Company for Agway’s use of the Company’s technology with certain products. In March 2000, the Company and Agway entered into a Sub-Agreement with respect to Planet’s patented/patent pending coatings and/or polymer systems sold for use on fruits, vegetables, floral and nursery items. During 2001, the Company received a $100,000 minimum royalty payment from Agway in order to maintain exclusivity. On October 1, 2002, Agway, Inc., filed a voluntary petition for reorganization under Chapter 11 of the United States Bankruptcy Code. The Sub Agreement provided for an additional minimum royalty of $300,000 on or before October 31, 2002 to maintain exclusivity. This payment has not been received or accrued by Planet. Pursuant to the Sub Agreement, Planet notified Agway that the payment was not received. Under the terms of the Sub Agreement, Agway has sixty (60) days during which Agway may make the necessary payment and retain market exclusivity for this technology. Failure by Agway to make payment prior to the end of this period will permit Planet to issue additional non-exclusive licenses for this technology to other interested parties in the fruit, vegetable, nuts and flowers segments of the agricultural products industry. Management cannot assure that the Company will be able to obtain any new agreements that would generate comparable revenues.

8


Table of Contents

PART I — FINANCIAL INFORMATION
Item 2 — Management’s Discussion and Analysis of Financial
Condition and Results of Operations

Planet Polymer Technologies, Inc.

Except for the historical information contained herein, the discussion in this report contains forward- looking statements that involve certain risks and uncertainties. The Company’s actual results could differ materially from those discussed in this report. Factors that could cause or contribute to such differences include, but are not limited to, those discussed below and in the Company’s Form 10-KSB for the fiscal year ended December 31, 2001.

OVERVIEW

     Since Planet Polymer Technologies, Inc. (“Planet” or the “Company”) was founded in 1991 substantially all of the Company’s resources have been devoted to the development and commercialization of its technologies and products. This has included the expenditure of funds to develop the Company’s corporate infrastructure, support the Company’s marketing efforts and establish a pilot production facility, in addition to research and development.

     Planet has incurred operating losses since inception and had an accumulated deficit as of September 30, 2002 of approximately $14.3 million. Pending commercial deployment of and related volume orders for the Company’s products, the Company expects to incur additional losses.

RESULTS OF OPERATIONS

     On December 28, 2001, the Company sold certain assets of the Company relating to its Metal Injection Molding (“MIM”) business, including intellectual property, technology, manufacturing equipment and raw material and finished goods to Ryer Industries LLC (“Ryer”).

     The Company’s revenues decreased to approximately $64,000 for the three months ended September 30, 2002 from approximately $153,000 for the same period in 2001 and to approximately $142,000 for the nine months ended September 30, 2002 from approximately $313,000 for the same period in 2001. These decreases were primarily attributable to no AQUAMIM® sales, resulting from selling all AQUAMIM® assets in December 2001 and no EnviroPlastic® Z sales partially offset by higher Agway development income, revenue from research and development technical consulting and approximately $10,000 and $2,000 in royalties paid by Ryer in the third and second quarters of 2002, respectively. Ryer has defaulted on required payments and Agway has filed for reorganization under the bankruptcy code. As a result, revenues associated with these activities may decrease.

     Cost of revenues decreased to approximately $47,000 for the three months ended September 30, 2002 from approximately $108,000 for the same period in 2001 and to approximately $102,000 for the nine months ended September 30, 2002 from approximately $249,000 for the same period in 2001. These decreases were primarily due to decreased revenues and a change in product mix away from AQUAMIM® and EnviroPlastic® Z.

     General and administrative expenses decreased to approximately $148,000 for the three months ended September 30, 2002 from approximately $189,000 for the same period in 2001 and to approximately $335,000 for the nine months ended September 30, 2002 from approximately $623,000 for the same period in 2001. These decreases were primarily attributable to a reduction in staff, reduced use of outside services, and lower depreciation and amortization expense resulting from selling all AQUAMIM®

9


Table of Contents

Item 2 — Management’s Discussion and Analysis of Financial
Condition and Results of Operations — (Continued)

Planet Polymer Technologies, Inc.

assets in December 2001 partially offset by bad debt allowances of $80,000 recorded as described in note 6.

     Marketing expenses decreased to approximately $33,000 for the three months ended September 30, 2002 from approximately $51,000 for the same period in 2001 and to approximately $83,000 for the nine months ended September 30, 2002 from approximately $189,000 for the same period in 2001. These decreases were primarily due to a reduction in staff and reduced promotional expenses.

     Research and development expenses decreased to approximately $23,000 for the three months ended September 30, 2002 from approximately $55,000 for the same period in 2001 and to approximately $108,000 for the nine months ended September 30, 2002 from approximately $283,000 for the same period in 2001. These decreases were primarily due to a reduction in staff, severance costs related to employee terminations in the first half of 2001, greater research and development expense reimbursement from Agway and lower depreciation and amortization expense resulting from selling all AQUAMIM® assets in December 2001.

     In June 2002, the Company recorded a charge of approximately $62,000 relating to the write-off of certain EnviroPlastic Z intangible assets held for sale when it was determined that future undiscounted cash flows associated with these assets were insufficient to recover their carrying value. The assets principally represent the Company’s historical ownership interest in product rights and license agreements relating to the Company’s EnviroPlastic Z patent.

     Other income (expense), net increased to approximately $5,000 for the three months ended September 30, 2002 from a net expense of approximately $3,000 for the same period in 2001 and increased to approximately $26,000 for the nine months ended September 30, 2002 from approximately $16,000 for the same period in 2001. These increases were primarily attributable to a gain on the sale of fixed assets and securities partially offset by lower cash balances and lower interest rates.

LIQUIDITY AND CAPITAL RESOURCES

     The Company used cash of approximately $327,000 for continuing operations for the nine months ended September 30, 2002. Such funds were used primarily for research and development activities, marketing efforts and administrative support.

     Net cash provided by investing activities of approximately $126,000 for the nine months ended September 30, 2002 resulted from the receipt of payments on a note receivable associated with the sale of MIM assets to Ryer and the sale of other equipment to unrelated parties.

     Net cash used by financing activities was approximately $40,000 for the nine months ended September 30, 2002. Such funds were used for payments associated with capital lease obligations.

     The Company does not believe that its existing sources of liquidity and anticipated revenue will satisfy the Company’s projected working capital and other cash requirements through June 30, 2003. The Company expects that it will need to raise or generate substantial additional capital to accomplish its business plan over the next year. The Company has reduced staff and operating expenses, reduced or sold non-Agway or agricultural assets, while continuing to provide technical research and development for Agway’s FreshSeal commercial program and Optigen development activities, as well as support of MIM asset utilization at Ryer Industries. Agway has filed for reorganization and Ryer has defaulted on certain

10


Table of Contents

Item 2 — Management’s Discussion and Analysis of Financial
Condition and Results of Operations — (Continued)

Planet Polymer Technologies, Inc.

payments. Accordingly, management cannot provide any assurance that the Company will be successful in satisfying future working capital and other cash requirements past December 31, 2002. If it cannot, the Company may have to cease operations and liquidate its assets and liabilities and prepare its financial statements on a liquidation basis instead of a going concern basis. The Company’s future capital requirements will be dependent upon many factors, including, but not limited to, costs associated with the continued research and development of the Company’s proprietary polymer materials, costs associated with the filing and enforcement of the Company’s patents, costs associated with manufacturing scale-up and market acceptance, and the timing thereof, of the Company’s products. There can be no assurance that the Company will be able to generate positive cash flows or profitability in the future.

     On December 28, 2001, the Company sold certain assets of the Company relating to its Metal Injection Molding (“MIM”) business, including intellectual property, technology, manufacturing equipment and raw material and finished goods to Ryer Industries LLC (“Ryer”). In consideration of these assets, Ryer had agreed to pay to the Company cash in the amount of $328,157, plus a royalty of 6% on sales of custom feedstocks sold during the period January 1, 2002 and December 31, 2009. Additionally, Ryer had agreed to pay the Company a royalty on all tungsten carbide feedstock sales in the amount of $2.50 per net pound during the period July 1, 2002 and June 30, 2010. Ryer and the Company also entered into a Consulting Agreement for consulting services related to the business and technology sold to Ryer.

     Through October 31, 2002, the Company had received $178,157. In August 2002, Ryer defaulted on its required payments. The Company has continued to accrue interest on the notes; during the three months ended September 30, 2002, $3,803 of interest income was accrued but not collected. At September 30, 2002, the present value of the remaining amounts due was $143,539, discounted at 10%. Management has determined it reasonable to make a provision for loss of $73,500 against these notes. This loss provision is included in general and administrative expenses in the Condensed Statements of Operations. In October 2002, the Company and Ryer entered into a Forbearance Agreement which modified the payment schedule for the remaining obligations to the Company with payments to begin in December 2002, and continue through April 2003. Royalty payments associated with sales from these technologies were deferred and are scheduled to resume in December 2002. The Company remains in dispute with Ryer over how certain royalties are calculated and paid, but has agreed to stay resolution of that dispute until other deferred payments are made or Ryer defaults. If Ryer defaults, the Company will seek to enforce the Confession Judgment given by Ryer to the Company in connection with the Forbearance Agreement, which provides among other things, for turnover to the Company of the assets sold by the Company to Ryer.

     In November 1998, the Company granted Agway an exclusive worldwide license in connection with the Company’s technology for time-release coatings for a variety of agricultural and food products (the “License Agreement”). The License Agreement outlines the general terms and conditions for the rights granted Agway thereunder. The Company and Agway agreed to execute further sub-agreements specifying the royalties to be paid to the Company for Agway’s use of the Company’s technology with certain products. In March 2000, the Company and Agway entered into a Sub-Agreement with respect to Planet’s patented/patent pending coatings and/or polymer systems sold for use on fruits, vegetables, floral and nursery items. During 2001, the Company received a $100,000 minimum royalty payment from Agway in order to maintain exclusivity. On October 1, 2002, Agway, Inc., filed a voluntary petition for reorganization under Chapter 11 of the United States Bankruptcy Code. The Sub Agreement provided for an additional minimum royalty of $300,000 on or before October 31, 2002 to maintain exclusivity. This payment has not been received or accrued by Planet. Pursuant to the Sub Agreement, Planet notified

11


Table of Contents

Item 2 — Management’s Discussion and Analysis of Financial
Condition and Results of Operations — (Continued)

Planet Polymer Technologies, Inc.

Agway that the payment was not received. Under the terms of the Sub Agreement, Agway has sixty (60) days during which Agway may make the necessary payment and retain market exclusivity for this technology. Failure by Agway to make payment prior to the end of this period will permit Planet to issue additional non-exclusive licenses for this technology to other interested parties in the fruit, vegetable, nuts and flowers segments of the agricultural products industry. Management cannot assure that the Company will be able to obtain any new agreements that would generate comparable revenues.

     On July 18, 2001, the Company’s Common Stock was delisted from the Nasdaq Small Cap Stock Market due to non-compliance with Nasdaq’s net tangible assets and minimum bid pricing requirements. There can be no assurance that the Company’s efforts will result in additional funds or that additional financing will be available on acceptable terms, or at all.

12


Table of Contents

Item 3 — Controls and Procedures

Planet Polymer Technologies, Inc.

EVALUATION OF DISCLOSURE CONTROLS AND PROCEDURES

     We maintain disclosure controls and procedures designed to provide reasonable assurance that information required to be disclosed in the reports we file with the SEC is recorded, processed, summarized and reported within the time periods specified in the rules of the SEC. Within 90 days prior to the filing of this Quarterly Report on Form 10-QSB, we carried out an evaluation, under the supervision and the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the design and operation of these disclosure controls and procedures pursuant to Exchange Act Rule 13a-14. Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures are effective in timely alerting him to material information relating to the Company required to be included in our periodic SEC filings.

CHANGES IN INTERNAL CONTROLS

     There were no significant changes in internal controls or other factors that could significantly affect our internal controls subsequent to the date of our evaluation.

13


Table of Contents

PART II — OTHER INFORMATION

Planet Polymer Technologies, Inc.

Item 1 — Legal Proceedings

     None

Item 2 — Changes in Securities

     None

Item 3 — Defaults upon Senior Securities

     None

Item 4 — Submission of Matters to a Vote of Security Holders

     None

Item 5 — Other Information

     Peter J. O’Neill resigned from the Board of Directors of Planet Polymer Technologies, Inc. effective October 1, 2002.

Item 6 — Exhibits and Reports on Form 8-K

     (a)  Exhibits:

     
Exhibit Number   Description

 
10.36   Forbearance and Stipulated Confession of Judgment Agreement between Planet Polymer Technologies, Inc. and Ryer Industries LLC
 99.1   CEO and CFO certification

        (b)    Reports on Form 8-K:
 
             None

14


Table of Contents

Planet Polymer Technologies, Inc.

SIGNATURES

In accordance with the requirements of the Securities and Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Date: November 14, 2002 Planet Polymer Technologies, Inc.

  /s/ Richard C. Bernier
Richard C. Bernier
Chief Executive Officer
(On behalf of Registrant and as Registrant’s
Principal Financial and Accounting Officer)

15


Table of Contents

SECTION 302 CERTIFICATION

     I, Richard C. Bernier, certify that:

     1. I have reviewed this quarterly report on Form 10-QSB of Planet Polymer Technologies, Inc.;

     2. Based on my knowledge, this quarterly report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this quarterly report;

     3. Based on my knowledge, the financial statements, and other financial information included in this quarterly report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this quarterly report;

     4. I am responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-14 and 15d-14) for the registrant and we have:

     a) designed such disclosure controls and procedures to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this quarterly report is being prepared;

     b) evaluated the effectiveness of the registrant’s disclosure controls and procedures as of a date within 90 days prior to the filing date of this quarterly report (the “Evaluation Date”); and

     c) presented in this quarterly report our conclusions about the effectiveness of the disclosure controls and procedures based on our evaluation as of the Evaluation Date;

     5. I have disclosed, based on our most recent evaluation, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent function):

     a) all significant deficiencies in the design or operation of internal controls which could adversely affect the registrant’s ability to record, process, summarize and report financial data and have identified for the registrant’s auditors any material weaknesses in internal controls; and

     b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal controls; and

     6. I have indicated in this quarterly report whether or not there were significant changes in internal controls or in other factors that could significantly affect internal controls subsequent to the date of our most recent evaluation, including any corrective actions with regard to significant deficiencies and material weaknesses.

/s/ Richard C. Bernier


Richard C. Bernier, Chief Executive Officer

/s/ Richard C. Bernier


Richard C. Bernier, Chief Financial Officer

November 14, 2002

16